Stainless Steel Carriage Bolt

Prince Fastener Carriage bolts measure headed steel fasteners with external male threads. they’re wont toassemble 2 unthreaded objects, generally with the utilization of a nut. getting the proper grade of bolt can certify you’ve got a solid,sturdy connection of 2 materials.

Additional information

Product Details

[table id=6 /]

What is Stainless Steel Carriage Bolt?

Carriage bolts are divided into large round head carriage bolts (corresponding to standards GB/T14 and DIN603) and small round head carriage bolts (corresponding to standard GB/T12-85) according to the size of the head. Carriage bolt, a type of fastener consisting of two parts, a head and a screw (cylinder with external threads), needs to be matched with a nut to fasten and connect two parts with through holes.

Basic Information of Stainless Steel Carriage Bolt

A bolt is used to connect two objects, usually through a light hole, and needs to be used in conjunction with a nut. A single bolt cannot connect. A wrench is generally used as a tool. The heads are mostly hexagonal heads, etc., generally larger. The carriage bolt is applied in the groove, and the square neck is stuck in the groove during the installation process, which can prevent the bolt from rotating, and the carriage bolt can move in parallel in the groove. Since the heads of the carriage bolts are round, there is no design of useful power tools such as cross recesses or hexagon sockets, and they can also play a role in preventing theft during the actual connection process.
Material: carbon steel, Q235, 45# steel, stainless steel
Nominal diameter: 5mm–20mm
Length: 15mm–300mm
Surface treatment method: zinc plating, chrome plating, copper plating, surface blackening

Standard of Stainless Steel Carriage Bolt

Specification for stainless steel round head square neck bolts (carriage bolts): German standard DIN603
Specification for stainless steel small round head square neck carriage bolts: National standard GB/T12-85
Specification for stainless steel large round head square neck carriage bolts: national standard GB/T14-8

Prince Fastener manufacturers and distributes a range of steel fasteners together with Screws,washer,nuts,bolts, studs, carriage bolts,non-standard fastener and additional. steelmay be a common material for fasteners thanks to its smart strength and skill in reality hundreds.

It responds well to heat-treatments with nominal work hardening and crispiness.it’s straightforward to machine and may meet the tight tolerances needed for threading and Prince Fastener configurations. steel is additionally associate degree economic metal.
Carbon steel is classified by the number of carbon within the alloy, that impacts the properties of the steel. Low steel, with 0.05-0.3% carbon, is ductile and Prince Fastener malleable. it’s low strength and may be hardened through carbonizing. it’s the smallest amount expense of the steel alloys.
Medium steel has zero.3-0.59% carbon, that provides the alloy with exaggerated strength and smart ware resistance. it’s straightforward to machine and is employed for cast and automotive components.
High steel and ultra-high steel is extremely sturdy and is employed for springs and high-strength product. These alloys may be tempered to terribly high hardness while not crispiness, and square measure used for terribly high wear applications. These Prince Fastener alloys have carbon from zero.6-0.99% for top steel and one.0-2.0% for ultra-high steel.

Prince-fastener-contact

Want to get more information?

Prince Fastener Is Here for Creating Quality Screws With Competitive Costs for You,and Offer the Technical Supports and Exclusive Services for Your Business.

Prince fastener production process

 

Basic concepts of Prince Fastener screw production

1、Prince Fastener Manufacturing screw can be divided into: cold heading, hot machining (turning, milling, etc.)
2、Cold heading is the use of plastic metal, by using cold mechanical pressure or drawing, reaches the metal solid deformation of.
3、Hot upsetting is the material after heating and pressure processing make the shape of the material to meet the
designrequirements.
4、Prince Fastener Machining is a small batch of special or special bolts of the six corners of the head is turned into after the milling.
5、 Screw bolt thread: mechanical and manual threading, similar to die.
6、 Milling tail: generally completed by the end of the Prince Fastener cutting machine.
7、 The difference between cold and hot upset: cold heading bolts` surface are more beautiful, dozen red bolt surface oxide skindoes not look good; cold heading high production is efficiency; general Prince Fastener M24 bolts will need to play red;

Analysis of the causes of the phenomenon and the causes of the forming process

1、Eccentric: two red and improper installation and adjustment machine.
2、Minow: a poor installation and improper Prince Fastener adjustment machine at.
3、Head is not round: the choice of a die or a punch forming is not enough.
4、Play the mode of crack: crack or die R angle, so that the model is hit by the two collision.
5、Head double: bad punch.
6、Flash: a bad, punching molding is mainly between punch and die hole clearance is too large or too short by red bars.
7、Crack angle: the punch needle burst or two punch and punch is not heavy.
8、Head cracking: material, or a die using error (such as pan head Hexagon washer head of a die), and lubricating oil.

Analysis of adverse phenomena and causes of common rolling

1、Processing crack: tooth plate and adjust the Prince Fastener old machine.
2、Blunt tail: the machine is not properly adjusted, the tooth plate is too old.
3、Crooked tail: the control screw on the seat board seat is too tight.
4、Tail: tooth wear plate and improper adjustment machine.

Prince fastener production process

We can manufacture and customize all types of fasteners for a wide range of industries

Prince Fastener Manufacturing is committed to serving world’s major distributors, wholesalers, retailers, enterprises , and terminal customers, and can customize all kinds of fasteners, non-standard parts according to various requirements of  customers to provide overall supporting solutions for customers in different industries and makes customers to achieve convenient and fast” One-stop fastener purchasing”experience

We can manufacture and customize all types of fasteners for a wide range of industries

fastener usage
fasteners usages
fasteners usage
screws applications

Why Choose Us?

Prince fastener experiences
prince fastener certicification

Prince Fastener own advanced manufacturing equipments introduced from Taiwan such as Head Making machines, Thread Rolling machines, Net Furnace and examining machines like Micro Hardness Tester and Microstructure Tester. We can provide the products you want with good qualities and competitive prices!

prince fastener workshop
FAQ

Q:The quality of your Drywall screw for metal?

A:Prince fastener has advanced production and testing equipment .Every products will be 100%
inspected by our qc department before shipment

Q: Are you trading company or manufacturer of Drywall screw for metal?
A:Prince fastener is a factory with 30 years of manufacturing experiences in Shanghai,China.

Q: What is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.

Q: Do you provide Drywall screw for metal samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge and customers only afford the freight costs.

Q: What is your terms of payment ?
A: 30% T/T in advance ,balance before shippment.

Q: Why choose us?
A: 1) Reply you in 24 working hours.
2)Experienced staffs would like to answer all your questions in time.
3) Customized design is available. ODM&OEM are welcomed.
4)Special discount and protection of sales are provided to our consumers.
5) Prince fastener can provide free sample, consumer should pay the freight first, and the expensive sample cost will be added in the next order.
6) As an honest exported seller, Prince fastener always use professional factory, quality quotation, good service, skilled
technicians to ensure our products to be finished in high quality and stable feature.

Q:How about your price?
A:Quality products with reasonable price. Please give me a inquire, we will quoted you a price for you refer at once.

Q:What kind of products do your factory manufacturing?
A:Our main products are: drywall screw,chipboard screw, machine screw,self tapping screw,self drilling screw,Non/standard
screws,Engineering fastener(High strength bolts;Nuts;Washers;Anchor),Stainless steel screws,Self Drilling Screw, Self Tapping Screw, Thread Rolling Screw, Thread Cutting Screw, Machine Screw, Concrete Screw, Roofing Screw,
Drywall Screw, Particle Board Screw, Chipboard Screw, Construction screws, Coach screws, Lag screw, Wood Screw, Euro
Screw,Collated Screw, Furniture Screw, Sems Screw, Thumb Screw, Wing Screw, Phillips Head Screw, Set screws, Metric set screws,Sheet metal screws, Eye screw, Security head screw

en_USEnglish

CONNECT

We will contact you within 24 hours.

For your urgent inquiries,please contact us through whatsapp No. : +86-18930191254

hold on

There is a latest product catalogue and a special quotation for you Today ,please feel free contact us.

For your urgent inquiries,please contact us through whatsapp No. : +86-18930191254

Prince fastener factory